What is your input video resolution?
1560x1080
Funny thing 1440x1080 works even worse.
Iām not sure if this has been fixedā¦ but on a 3 movies I own and was upscaling the audio slowly goes out of sync. Halfway through the movies the audio was -500 ms off. By the end of the movie it was like -1250 ms off.
I went back to using 2.4 and the error disappeared. I am using Artemis Medium for all my movie upscaling. The best way to tell is just by waiting for someone to talk. Youāll see the audio is out of sync especially by the end of the movie.
Sorry if this has already been address in this latest latest update.
Thanks.
1 Like
Donāt use VEAI for audio until a future release where that part of the process will be changed. Right now the quality is reduced dramatically.
1 Like
Currently I am not using VEAI for audioā¦ I add the audio later from the original movie. However, 2.6 Artemis is not in sync with the original audio for some reason. Itās only apparent on long videos. Like I said, by the end of a 2-hour video itās about -1250ms off sync. I went back to 2.4 and it works fine. Go figureā¦
To clarifyā¦ I think the new version is dropping frames on long videos. Itās about 1 second and a half by the end of my movie. I had to set the audio back -1250 ms to sync up the video with the audio which means itās the video that is shorter - which means frames are being dropped. Not sure if this is the case with all models. Iāve only tested Artemis Medium 12 and 13. Iām also exporting as .mov files.
I am having audio sync issues with 2.6 on mac miniā¦ i have tried remuxing the audio several timesā¦ and changing the a/v sync on my 4k playerā¦ nothing worksā¦ is this a known bug? something being worked on?
some have mentioned going back to 2.4 but i dont see an option of downloading older versions on the site
what are you using to merge/alter the audio?
Windows 10 pro 21H1 build:19043.1348
VEAI v2.6.0
While upscaling total 3 works at same time, windows showed insufficient disk maessage.
And I made free space with delteing some files at once.
It was OK at that time( about 3:40 PM), but at the end of the total 3 tasks(about 97percent) all works showed error message( after 3 hours ).
So I opend the property of errored output file. It shows the last modified time 3:40 PM.
I hope TEVAI would stop at this situation and TopazLab woul help me not to waste time at this situation.
rx6900xt Adrenalin 21.10.2 driver
Here you go.
Iām on pc and using MKVToolNix GUI.
Here are my logs from VEAI 2.6.0
What happens is I load my videos, it downloads the models, but it crashes before it starts processing.
My setup is IntelĀ® Coreā¢ i5-7400 CPU @ 3.00GHz 3.00 GHz with 16GB of RAM running 64-bit Windows Professional Build 21H1.
Hereās my System Profile:
I am having a issue with batch processing of HEVC 4K 29.97fps files to ProRes where the codec timebase of the first exported file is too high as reported by ffprobe. In particular, tbn and tbc is reported to be 15712911.00.
I am processing 10 bit HLG HEVC files, and am disappointed that the values of color_primaries (bt2020), color_trc (arib-std-b67) and colorspace (bt2020nc) from the yuv422p10le pixel format are not exported, which forces an additional step to encode to put them back in. Just a suggestion for the futureā¦ please let these ride along from the original file, it would make things so much simpler.
And one more comment. Chronos processing on 10 bit data does not appear to be 10 bitā¦ (judging by the banding and the mangling of the colors).
i donāt know since how many times you own or maybe use the trial of the 2.6.0, but iām afraid that the files you use are not supported yet or not supported well. the video engine IO of VEAI will be completly redone soon and will support much more stuff, but from the list you give here, iām really not sure, that it can do, (for now) what you ask. best is to maybe write to support or wait of a possible answer (heās very busy lol) from the dev.
I own a copy. I understand the files are not supported, but I can tell that Topaz is using the ffmpeg encoder (Lavf58.20.100), and it actually does a good job with the data (with Artemis), I simply have to use ffmpeg to put the metadata back in that was stripped out. I donāt think it would be a huge task to simply keep the same color space metadata and write it out. (For example, employ ffprobe to capture the info thatās in the input stream and then add them back in while encoding the output stream).
letās hope the dev will see your message here. or use the ārequestā feature inside VEAI. they actually work very hard on the software.
