Hi, not sure if the ones that don’t get the pixel choice are interlaced or not. I can usually tell visually by the combing effect. Then I find better deinterlacing results with Handbrake, then re-import to TVAI. As for the model that best suits my needs, and I have trialed every one, is Proteus-Manual-then adjust the sliders accordingly (they’re never the same ) and usually Apollo for frame interpolation, sometimes Chronos or Chronos Fast generally ves a smoother result.
2 Likes
v3.0.7 downloads the models but on Exporting or Previewing
an error message says it cannot find the model???
Hi Petros - the software having you log in every time is a bug and will be fixed in tomorrow’s update.
4 Likes
Hi - what encoder & container did you use for the output? Can you please send me the original file through: Dropbox?
Thank you,
Looks like a massive chroma plane mishap. I venture to think something is misdefined in the source. But I just saw the dev is already on it. As you were. 
Same here and I have issues with models failing to load too. Only started having these issues after updating to v3.0.7
Pretty frustrating to say the least. Hope they fix it sooner rather than later.
Thanks for reply, I’ll just have to be patient and wait then. At least I can still use Video Enhance AI !
I’m getting an ffmpeg -vsync is depreciated error that stops v3.0.7 from being able to process ANY video. What the heck, Topaz? How can I get this to function?
Does the RTX 4080 work fine with 2.64 or only with 3.xx ?
You’re joking, right?
I turned on Stabilization only on a 29 second 120 fps video and it says that it will take more than an hour to do the operation on an NVIDIA 3060 12GB video card.
Here is media info:
Format : MPEG-4
Format profile : Base Media
Codec ID : isom (isom/iso2/mp41)
File size : 174 MiB
Duration : 29 s 16 ms
Overall bit rate : 50.2 Mb/s
Writing application : Lavf58.76.100
Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main@L4.1@Main
Codec ID : hvc1
Codec ID/Info : High Efficiency Video Coding
Duration : 28 s 998 ms
Bit rate : 50.1 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 120.008 FPS
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Bits/(Pixel*Frame) : 0.201
Stream size : 173 MiB (100%)
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Codec configuration box : hvcC
Audio
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : mp4a-40-2
Duration : 29 s 16 ms
Source duration : 29 s 3 ms
Bit rate mode : Constant
Bit rate : 156 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 48.0 kHz
Frame rate : 46.875 FPS (1024 SPF)
Compression mode : Lossy
Stream size : 552 KiB (0%)
Source stream size : 552 KiB (0%)
Language : English
Default : Yes
Alternate group : 1
mdhd_Duration : 29015
I converted MPEG-TS with DDV3 and tested a scene with a lot of motion
DDV3-2.64 3840x2160
The image quality is the best, but there are deinterlaced parts and afterimages
DDV3-3.0.5 3840x2160
Deinterlacing is good, but there is noise overall
DDV-3.0.0-5 2880x2160 (Early Access)
Good deinterlacing noise removal
Using Chronos with these 3 versions, 3.0.0-5 gives the best results
2 Likes
Hi ! When you use dione dv or dione TV, it doubles the frame rate, so how do you use chronos at the same time as one of these models? Let’s take the example of a 50 fps video interlaced at 25 fps. Do you use dione with chronos to add twice as many images? So 100 fps?
If you think that’s bad, look at what happened to me when I enabled those options.
These options need some looking into.
4 Likes
I’m experiencing the same as @DaveL and I’m fully licensed (current) across the entire Topaz Labs suite of products. Only the Topaz Video AI (v3.0.7 release) requires me to authenticate/login every single time I open the app. Consistent behavior 100% of the time. All other Topaz Labs product maintain an authenticated state on close and re-open of the app.
That’s actually just a warning which everyone gets and won’t affect anything. The real cause/error for processing failing should be in the log file. You could post it and tag @yazi.saradest
1 Like
Stabilizing is brutal on time, hope they work it up as with Chronos, pretty fast and good.
2 Likes
I think it will take one day in my Graphic Card 1060 3gp 
2 Likes
I have also noticed 3 . 0 is more sharp, but that for me, is when doing clean up. “Estimate” is a little too sharp i think. In 2.6.4 it is more spot on out of the box.
This topic was automatically closed after 41 minutes. New replies are no longer allowed.
