1.7.1 Still unable to import Sony S-Log 3 4:2:2 video

Even after updating to Topaz Video 1.7.1, I still can’t import Sony S-Log 3 4:2:2 videos. This happens regardless of whether I enable or disable hardware decoding. The sources I loaded in version 1.6.1 are rejected with an error message after the update.

Can you send the logs for review by the team since this is still being seen in 1.7.1?

logsForSupport.zip (3.5 MB)

This is the log file, Thank you.

I also installed Topaz Video on my laptop right away to test it out. Same problem: Version 1.6.1 could open the 4:2:2 Sony videos (Sony ZV-E1), but versions 1.7.0 and 1.7.1 couldn’t. 10-bit 4:2:0 files work in all versions.

Thank you, sending those to the team for review now. Is it possible for you to share a sample of that file?

You can securely submit your file(s) to our Dropbox using the link below. Please be sure to send me a note to let me know you sent something and include the file name.

Submit File to Dropbox

Hello, I’ve uploaded three slightly different sample videos, none of which can be imported into Topaz Video—neither on my PC nor on my laptop:

Sony_AVC_422_25p.mp4, Sony_AVC_422_50p.mp4, Sony_HEVC_422_50p.mp4

As mentioned earlier, 4:2:0 videos work perfectly.

Weirdly enough, those files imported without issue into my version of 1.7.1.

Let’s check something and see if this is a file path or file name issue with special characters. Can you take one of the files you uploaded to dropbox, with that name and put it in a folder on your desktop and bring into the app from there?

This doesn’t work, I get:

The following files could not be loaded. Please ensure they are valid video or image files, or convert your file to one of our supported types.

You can find a full list of supported file types at our website: Supported File Formats, Encoders and Containers | Topaz Video

C:/Users/richt/Desktop/Sony_AVC_422_25p.mp4

Interesting, testing on my Windows 11 system with a RTX 5060 Ti the file imports.

My Windows 10 system with a RTX 3060 gets the same error you are seeing and does not import, even with the hardware decoding turned off.

This means its most likely not a GPU situation with the hardware decoding changes from 1.6.1. Looking into this further to continue testing and update the devs for their investigation.

The RTX 30… and RTX 40… cannot decode 10-bit 4:2:2 HEVC. But the RTX 50… can, I think. Perhaps disabling GPU decoding doesn’t work, and Topaz Video continues to attempt to decode 4:2:2 HEVC using hardware, resulting in an internal error from the graphics driver.

I have a problem with importing mp4 files into Topaz Video, which has not occurred before. Every time I try, I get a message that this file format is not supported, even though it is on the list of file formats that Topaz Video supports. These are files from a Sony A1 camera.

To better understand what could be causing this issue, could you please send over your app’s logs?

To gather logs, please open the app and select Help > Logging > Get Logs for Support and attach the zip file to your reply.

logsForSupport.zip (1.9 MB)

Can you try turning off hardware decoding?

File> Preferences> Processing

I did that, but it didn’t change anything.

You may need to restart the app. If it still doesn’t work, can you send the updated logs?

logsForSupport.zip (1.9 MB)

I had already turned that off before (set it to CPU). Sony 10-bit 4:2:2 cannot be imported.

I’ve examined your newer Topaz Video log from October 2–3, 2026, and this time there is a specific technical error that explains why your Sony A1 MP4 files are being rejected.

Your newer log shows Topaz Video 1.7.1, compared with version 1.6.0 in your earlier log.

The key error

At lines 4326–4331, Topaz reports:

Codec hevc_cuvid is not supported with this chroma format.

Failed to open codec through avcodec_open2

Could not open reader at path:
I:/Szwajcaria/A1 20240119_7865.MP4

Unable to load video

The same error occurs again for A1 20240119_7866.MP4.

This is considerably more informative than the generic “file format not supported” message.

Topaz is attempting to use NVIDIA’s hardware HEVC decoder (hevc_cuvid), but that decoder is rejecting the video’s chroma format.

This explains why an MP4 file can be supported in principle yet fail to import. The MP4 container is not necessarily the problem; the issue is the video stream’s compatibility with the selected decoder.

Why your graphics card matters

Your log identifies the following hardware:
NVIDIA Quadro RTX 5000
Video memory 16 GB
NVIDIA driver 595.79
Topaz Video 1.7.1

The Quadro RTX 5000 is a powerful GPU, but its hardware HEVC decoder has limitations, particularly with certain 10-bit 4:2:2 video formats.

If your Sony A1 files were recorded in XAVC HS 10-bit 4:2:2, that would be a strong explanation for the error. The log does not conclusively identify the exact chroma format, so we should verify it.

What I would try first

  1. Open Topaz Video → Preferences and look for a video decoding or hardware decoding option. If available, switch hardware decoding off or select software/CPU decoding. This is separate from selecting the GPU for AI processing.
  2. Restart Topaz and try importing one of the rejected MP4 files.
  3. If Topaz does not offer a software decoding option, try converting a short sample to ProRes 422 HQ in Shutter Encoder and import the converted MOV file.

You can continue using the NVIDIA GPU for Topaz’s AI processing even if the original footage must be decoded using the CPU.

One important question: When recording these Sony A1 videos, are you using XAVC HS 8K, 10-bit 4:2:2, or another recording format?

If you tell me the recording format, I can narrow down whether this is a hardware limitation of your Quadro RTX 5000 or a regression in Topaz Video.

I had already applied the settings mentioned in point number one, but it made no difference. Furthermore, I checked files from a DJI drone (in MP4/D-Log format), and they won’t open either. This issue appeared recently—likely after installing an update. I even tried opening files that I had previously edited without any trouble, but the program refuses to open those as well. I converted some files to AVI using Adobe, and they work; I also converted them to Apple ProRes (MXF) using both Adobe and Shutter Encoder, and those work too. I really hope that converting files isn’t the intended solution, as everything used to work fine without it.

(attachments)

logsForSupport.zip (2.11 MB)